Flex I/O

smohamed

Member
Join Date
Mar 2008
Location
ON
Posts
108
Hey everyone.

Have another question, this time regarding Flex I/O. We're using a ControlLogix PLC (via Ethernet) and Flex I/O, specifically a 1794-IB10XOB6 to bring in some Inputs and Outputs.

We've configured the internal dial to 2, and can see our inputs coming into the PLC with no problems. However, our outputs do not come on through the Flex I/O. Specifically, we do not see them come on on the Flex I/O unit itself.

Any ideas?

Thanks.
 

Similar Topics

New to vfds. I put in parameters. IP, but I get ethernet flashing and link solid. What did I do wrong?
Replies
1
Views
35
Are the N files in the 525 the same as the 40p for ethernet? (E-Comm card) I have used 40P with Micrologix 1400 Messaging but don't see the N...
Replies
1
Views
73
How to remove faceplate from power flex 753 and not shutting the system down. What parameters should i change?
Replies
1
Views
78
Hey all, I am currently working on a depalletizer for a customer and we are doing a hoist upgrade. This is a SLC500 processor and the drives are...
Replies
6
Views
191
Can anyone recommend a flexible 600-volt shielded ethernet patch cable? I have used them from Allen Bradley / Panduit before and they are too...
Replies
0
Views
60
Back
Top Bottom