Omron CJ1M CPU11 Error that appears when i connect via serial port

Msobh

Member
Join Date
Mar 2018
Location
Egypt
Posts
1
Hello,
I have PLC Omron CJ1M/CPU11, the problem is whenever i connect the PLC to my PC (laptop) via serial port and try to go direct online using cx-programmer either it fails to upload or the following errors occurs

b2_download_file_by_id



These errors only appear when the machine start working when the machine stops the errors disappear, this happens only when i connect via serial port. I tried connecting via peripheral port, no errors appeared which is kinda weird.
I tried changing the cable, it didnt work. Any help ?


Thanks in advance and have a nice day.
 

Similar Topics

Hello everyone. I am new when it comes to Omron PLCs. Currently I'm uploading program from CJ1M PLC using CS1W-CIF31 cable only. I connected the...
Replies
2
Views
99
Hey, new to Omron. I have a CJ1M CPU11 PLC that I need to connect to and backup. When I look up Omron programming software, I find three different...
Replies
1
Views
1,647
Hi everybody, I can't transfer data from laptop to omron sysmac cj1m cpu11. I use cable "omron cs1w-cn118" and Uport 1150 (RS232),I sure software...
Replies
0
Views
3,882
I begginer in Omron PLCs and I want to ask what is the last IDE where using for programming omron CJ1M-CPU11 PLCs, and from where can I download it?
Replies
2
Views
2,967
I've been thrown to the wolves on a project that was done long before I started. A customer put in a Omron set up and is having trouble syncing...
Replies
10
Views
7,714
Back
Top Bottom