New program SLC 500

LESLIE M

Member
L
Join Date
May 2008
Location
PERTH
Posts
4
G'day guys

I have a set of new drawing for a VUCUUM and COMPRESSOR Plant upgrade. I am wondering if any one out there would help me write simple programs to for these.
Theres like only 25 digi inputes, 12 analog input and 15 outputs to this project.
I have a drawings on Auto sketch V9 for u if u wanna help.

Thanks

LESLIE, Perth
 

Similar Topics

S
BASIC module on SLC 500- basic program question
Hi all I have a SLC 5/04 with a BAS module sending print data to a dot matrix printer. In the Basic program in this module, there are what...
Replies
4
Views
1,910
parky
P
C
SLC 500 5/05 Processor- Can you load any program without I/O to test ?
Good Evening , I would like to test some message instructions , and other modifications in a SLC 500 5/05 Processor in the office without 2...
Replies
4
Views
1,950
rupej
R
M
SLC 500 fixed program upload
Does anyone know of a free program I can use to upload the program from an AB SLC 500 Fixed and read the error code? I don't want to do any work...
Replies
1
Views
1,573
Ken Roach
Ken Roach
A
How to view a Rockwell SLC-500 program
Hi, I am trying to integrate my system with a Rockwell SLC-500 PLC. I have the program for the Rockwell PLC with me. I have downloaded the...
Replies
6
Views
3,129
arbj
A
B
SLC-500 program lost rungs
A few months ago we had a issue with a 5/04 not working properly and when a compare was done it was found to have a rung missing in the 5/04. It...
Replies
3
Views
1,702
Aabeck
Aabeck
Back
Top Bottom