lader logic for 3 XOR input
- Thread starter bleach
- Start date
L D[AR2P#0.0]
Lifetime Supporting Member
Draw the truth table for us
L D[AR2P#0.0]
Lifetime Supporting Member
3 inputs (a,b,c) gives 8 states.
Assuming Y=Output, you're only showing 2 inputs (a,b)
L D[AR2P#0.0]
Lifetime Supporting Member
..
L D[AR2P#0.0]
Lifetime Supporting Member
You could have combined two 2-input xor's:
Excellent Program
Look at the excellent program for minimizing boolean questions
http://karnaugh.shuriksoft.com/
Regards,
Robert
Look at the excellent program for minimizing boolean questions
http://karnaugh.shuriksoft.com/
Regards,
Robert
panic mode
Member
are you sure about the last state?
a b c y
0 0 0 0
0 0 1 1
0 1 0 1
0 1 1 0
1 0 0 1
1 0 1 0
1 1 0 0
1 1 1 0
L D[AR2P#0.0]
Lifetime Supporting Member
xor for n-inputs is true when an odd number of inputs are true.
Strictly speaking, the output of an exclusive OR is true when one and only one inputs are true, hence the 'exclusive' in the functional description. This is, and has long been, a matter of discussion between automation professionals.
Kind regards,
Similar Topics
RUNG 1 : [A]-----(B)
RUNG 2 : [B\]----[A\]-----(C)
RUNG 3: [C]-----(DLatch)
RUNG 4...
Hello everyone, can anyone help me with covert the STL code to ladder.
Iam using plc s71200.
A %DB1.DBX33.7 // angel of vaccum...
Hello,
I was trying to create new module in I/O Configuration and I get the "Fatal Application Error"
Below is my plc setup if I need to try...
Hello friends I start newly plc programing with S7 300 but I dont know how to set and S_CU up counter, can any one help me about that with all...
Good morning fellow sea captains and wizards,
I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...