sanger Member S Join Date Nov 2005 Location Toronto Posts 172 Aug 13, 2018 #1 When I upload a program from one S7-1200 then download it to another I always end up with all zeros for the M registers. Is there a way to preserve the M registers when uploading and downloading?
When I upload a program from one S7-1200 then download it to another I always end up with all zeros for the M registers. Is there a way to preserve the M registers when uploading and downloading?
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Aug 13, 2018 #2 https://www.industry.siemens.nl/automation/nl/nl/industriele-automatisering/industrial-automation/simatic-controller/modulaire-controllers/simatic-s7-1500/Documents/81318674_Programming_guideline_DOKU_v12_en.pdf 3.2.7 Downloading without reinitialization The above section may help you out. Regards,
https://www.industry.siemens.nl/automation/nl/nl/industriele-automatisering/industrial-automation/simatic-controller/modulaire-controllers/simatic-s7-1500/Documents/81318674_Programming_guideline_DOKU_v12_en.pdf 3.2.7 Downloading without reinitialization The above section may help you out. Regards,