Connecting SEW Movidrive with Indramat permanent magnet motor

Timosegeren

Member
T
Join Date
May 2020
Location
Hoeven
Posts
1
Hello everyone,

I'm new to the world of servos. And now I'm facing the next problem:
I have a SEW Movidrive MDX61B and an Indramat MAC071C permanent magnet motor. Can I connect both or do I need an Indramat drive for this motor?

Thank you
 

Similar Topics

D
Connecting to a PLC through VM Ware
I haven't encountered problems connecting to a PLC through VM Ware but I am with this particular machine. I'm running Windows 7 on a Windows 10...
Replies
5
Views
85
robertmee
R
M
Connecting Different controllers (brands) with same I/O devices - Demo Station Design
Hi, I want to build a demo station to test devices and programs and I need some help with it. I want to connect GuardLogix, Piltzmulti and...
Replies
1
Views
133
JeffKiper
JeffKiper
N
Connecting to the PLC or 1756-ENBT over USB
please using the usb can i assign any ip address that i want ?
Replies
4
Views
140
geniusintraining
geniusintraining
A
Output is nc when connecting with wire.
Hi everyone, I need some help I new with omron plc. I using plc CP1L. When I do the program it's good and the plc is function as program. But when...
Replies
1
Views
83
Liam Moran
Liam Moran
C
Simultaneously connecting 2 devices to 1 RS 232 port.
I have a piece of equipment that is operated by a PanelView Plus 600 HMI touch screen via RS232 into a Micrologix 1500 PLC. I am trying to...
Replies
5
Views
141
lfe
L
Back
Top Bottom