Easy builder 8000 online simulation
- Thread starter Some one
- Start date
geniusintraining
Lifetime Supporting Member + Moderator
I think it depends on the PLC and port you are going to connect to
This may help https://dl.weintek.com/public/PLC_Connect_Guide/Siemens_S7_200_PPI.pdf
You can also go to this page https://www.weintek.com/globalw/Software/EasyBuilderPro.aspx
Click PLC on the right side in the blue bar, scroll down and select Siemens AG, then your PLC model (S7-200 or smart) then select your driver then download the PDF
This may help https://dl.weintek.com/public/PLC_Connect_Guide/Siemens_S7_200_PPI.pdf
You can also go to this page https://www.weintek.com/globalw/Software/EasyBuilderPro.aspx
Click PLC on the right side in the blue bar, scroll down and select Siemens AG, then your PLC model (S7-200 or smart) then select your driver then download the PDF
Similar Topics
I am using EB8000 building displays for machine temperature readouts and all is working fine. I recently incorporated one into a process machine...
Hello Friends;
I use FX1N-14MR PLC with 6070i 7 inch display HM. I design the screens and create tags by using tag editor. But PLC not response...
Hey All.
Im using Easybuilder pro. Im familiar with using the enable/disable function of the security tab on an object to use visibility. Im...
Hy guys !
I've been making some projects in this easybuilder pro for weintek HMI, and i am struggling with a tiny problem but i can't seem to...
I converted a Maple Systems EB5000 Project from a discontinued screen into a EB8000 Program and from there to a EB-Pro I have a MT8012iE screen...