Safety evaluations/SISTEMA library for FANUC

becs

Member
B
Join Date
Mar 2012
Location
Ontario
Posts
20
I'm doing a safety evaluation for a robotic system using a FANUC robot with DCS. To do the evaluation I am using the Siemens online safety evaluation tool.

I have imported the libraries for Rockwell, and Schmersal, but can't find a library for fanuc robots. The best I have found is a FANUC safety manual which tells me the Cat, PL and SIL for a few functions.

Does anyone know if FANUC makes their PFHd information available anywhere?
 

Similar Topics

B
AB 5069-OBV8S Safety Output Relay
Hi, I am using AB 5069-L306ERS2 CPU. My system should achieve SIL-2. I have safety door switches connected to AB 5069-IB8S module, and I want to...
Replies
1
Views
105
ASF
A
C
Mitsubishi R08SFCPU and RD78G8 communication to FR-E800SCE (Safety Version) on CC-link IE TSN
I'm struggling to get an FR-E800SCE to work on CC-Link IE TSN. I'm sure the issue is with the drive, when I plug in the network cable I get no...
Replies
1
Views
103
cottagewood
C
L
Question about SICK Safety Laser-scanner for robot arm
Hi I have a yaskawa gp7 robot arm which I am going to use for machine tending with a cnc mill. Is it a good idea to buy a SICK laser scanner for...
Replies
5
Views
230
bill4807
B
S
Power Flex 527 , safety inhibitor fault
Power flex 527 Network based safety drive had faulty and alarm pop up SOS Code internal fault Unable to set or clear the fault manually or...
Replies
5
Views
113
arpus4KM
A
K
AB Kinetix 6500 "Safety Configuration Tool"
Loving AB right now... We have an Allen-Bradley 2094-EN02D-M01 Kinetix 6500 servo drive that once had safe-speed monitoring which was eliminated...
Replies
2
Views
129
kekrahulik
K
Back
Top Bottom