AlfredoQuintero
Lifetime Supporting Member
Hello EtherCAT gurus.
Is it possible to delete the EtherCAT Stack Code information from an EtherCAT device using the available Windows tools from Beckhoff or EtherCAT Technology Group?
Tried the SSC Programmer but it only allows scanning and programming. Tried TwinCAT but does not seem to have such an option either.
Thanks for your advice.
Is it possible to delete the EtherCAT Stack Code information from an EtherCAT device using the available Windows tools from Beckhoff or EtherCAT Technology Group?
Tried the SSC Programmer but it only allows scanning and programming. Tried TwinCAT but does not seem to have such an option either.
Thanks for your advice.