Hi All,
I'm not an AB expert by any means, but have been given a project to do with RSLogix 5000. I'm picking most of it up pretty quick, but am having a problem with communication set-up to an ethernet radio gateway.
Products involved are:
PLC-Compactlogix L32E
Radio-Elpro 905U-E
The PLC is connected to an ethernet switch and we have wonderware, another vendor AB PLC and the radio connected to this switch. I have configured the PLC for the data exchange between the vendor PLC and my PLC. (Pretty simple both AB).
Problem comes in when I'm trying to configure the read/write or data exchange to the ethernet radio which is polling two other remote stations.
Any suggestions or examples would be greatly appreciated.
Thanks,
Stache
I'm not an AB expert by any means, but have been given a project to do with RSLogix 5000. I'm picking most of it up pretty quick, but am having a problem with communication set-up to an ethernet radio gateway.
Products involved are:
PLC-Compactlogix L32E
Radio-Elpro 905U-E
The PLC is connected to an ethernet switch and we have wonderware, another vendor AB PLC and the radio connected to this switch. I have configured the PLC for the data exchange between the vendor PLC and my PLC. (Pretty simple both AB).
Problem comes in when I'm trying to configure the read/write or data exchange to the ethernet radio which is polling two other remote stations.
Any suggestions or examples would be greatly appreciated.
Thanks,
Stache