Vijeo Designer and RS5000 emulator

Bob O

Member
Join Date
May 2003
Location
Posts
1,873
All,
Just started to work with Vijeo Designer 6.1.4 SP4 and was wondering if there is a way to point their simulator to RSLogix5000 emulator since I don’t have real hardware at this time.
TIA
 
All,
Just started to work with Vijeo Designer 6.1.4 SP4 and was wondering if there is a way to point their simulator to RSLogix5000 emulator since I don’t have real hardware at this time.
TIA

Hello. I´m looking on how to do this. Did you find out how to do it?
 
No, I didn't


"Logix emulator will not accept connections from anything but factoryTalk studio."


I don't think this is completely correct. I "think" [Memory] I was able to get Ignition pointed to it a couple years ago.
 
True, ignition clx driver will work pointed to IP address of box hosting emulator. But it looks to only work on windows 10 and later versions of emulate.

Other packages may with as well.
 

Similar Topics

Hello, I have been tasked with adding some analog signals for display and alarm setup in some old Schneider Electric HMIGTO HMI-panels. I have...
Replies
4
Views
128
Since upgrading to V6.2 12.24 SP12 24-21 the M221 PLC is no longer recognised by the HMI. The screen still works but it does not talk with the...
Replies
3
Views
921
I work for an OEM. I am trying to develop a generic HMI program that will display an overview screen displaying between 2 and 6 "widgets"...
Replies
1
Views
1,218
Hey all, I am using Vijeo Designer v6.2.8.12 for a mineral plant project. For that, I needed to incorporate three different plants' HMI page in...
Replies
2
Views
1,155
Hi, Is there a way to get an alarm ack/active flag in Vijeo Designer to store in a internal var? I found under action there are alarms action you...
Replies
1
Views
1,437
Back
Top Bottom