DSMCNC
Member
I have read some posts about the now discontinued CH D50 PLC.
I have lots of experience with this processor and I have two versions of PLC code with which to program it.
Both versions require a DOS machine to send the code to the PLC but for programming the software will run in a DOS shell under Windows XP and earlier Windows releases. To transmit the code you need a DOS machine as Windows' constant polling of interrupts will disconnect the RS232 for enough millisecs to crash the comm port.
If you need the software to talk to this PLC please PM me and I'll use a free FTP to send the zip file to you.
I can also walk you through if you need help.
Merry Christmas
Dave
I have lots of experience with this processor and I have two versions of PLC code with which to program it.
Both versions require a DOS machine to send the code to the PLC but for programming the software will run in a DOS shell under Windows XP and earlier Windows releases. To transmit the code you need a DOS machine as Windows' constant polling of interrupts will disconnect the RS232 for enough millisecs to crash the comm port.
If you need the software to talk to this PLC please PM me and I'll use a free FTP to send the zip file to you.
I can also walk you through if you need help.
Merry Christmas
Dave