Micro 1000 Analog

Thomas Sullens

Member

T

Join Date

Feb 2004

Location

Idabel, Ok

Posts

390

• Mar 29, 2004

• #1

Just wondering we`ve used the 2 current inputs on the AB Micro 1000 anl. Can we put a 500 ohm resistor in series with one of the 0 to 10 inputs and get 4 to 20?
Thanks

 

Vic

Member

V

Join Date

Jun 2002

Posts

246

• Mar 30, 2004

• #2

Not Series

Put the resistor across the 10 volt input so the input is reading the voltage across the resistor. A 4-20 mA signal will produce 2-10 volts at the input.

 

Vic

Member

V

Join Date

Jun 2002

Posts

246

• Mar 30, 2004

• #3

Not Series

Put the resistor across the 10 volt input so the input is reading the voltage across the resistor. A 4-20 mA signal will produce 2-10 volts at the input.

 

Thomas Sullens

Member

OP

T

Join Date

Feb 2004

Location

Idabel, Ok

Posts

390

• Mar 30, 2004

• #4

Vic
Thank you for the help