D. Woehlke
Member
I have an old 1394 servo controller running off of a AB 1746HSRV card. I took this and the ladder logic from the old machine and adapted it to the new. The problem I am having is I changed the pitch af the ballscrew the servo was turning and I don,t know how to adjust this in the ladder data files. Anyone know what I need to do? I can E-mail the program to whoever knows these systems and can give me a hand. Everything is working but commanding a 1 inch move gives me 3+ inches on the actuator.
Thanks in advance,
Dave
Thanks in advance,
Dave