mrtweaver
Member
Ok i have a technical question for all the ladies and gents out there. I am currently frankensteining a machine.
Here is the problem, i have a Horner XLt105 which is capable of providing the stepper pulses i need. I have a Kollmorgen/Warner Electric/Superior Electric Stepper drive part number SS2000MD7.
The problem is the output of the Horner is 24vdc PNP out, and input of step to the stepper drive is 5 to 12 vdc NPN.
The current freq is around 1khz.
So I am asking for some help and guidance here on what would be the best way so as i can take the output of the horner and drive the input of the stepper?
Here is the problem, i have a Horner XLt105 which is capable of providing the stepper pulses i need. I have a Kollmorgen/Warner Electric/Superior Electric Stepper drive part number SS2000MD7.
The problem is the output of the Horner is 24vdc PNP out, and input of step to the stepper drive is 5 to 12 vdc NPN.
The current freq is around 1khz.
So I am asking for some help and guidance here on what would be the best way so as i can take the output of the horner and drive the input of the stepper?