stevebec
Member
I'm trying to access a ML1100 controller via the built in web server. Everything is fine until I try to view one of the data views (ie "I1"), which causes the fault light to come on and RSLogix 500 reports an error code of 8 - Internal Software Error. I'm logged in as Administrator, so access rights shouldn't be a problem. I thought I may have hosed up something on the controller during my "learning curve", but I get the same thing on a controller right out of the box.
Thanks in advance for your help. Being new to PLCs, I was delighted to stumble across this forum and its wealth of information.
Thanks in advance for your help. Being new to PLCs, I was delighted to stumble across this forum and its wealth of information.