MikeGranby
Lifetime Supporting Member
Just to show how my mind works, every time I see QANDA, I start humming "Quando". Then it's only a short step to visualizing Murph and the Magictones, surrounded by red velvet at the Holiday Inn...
Totally OT! QANDA???
- Thread starter TheStarr
- Start date
Similar Topics
personally I don't care about golf - but this is one impressive shot ... if it weren't on tape, I wouldn't have believed it ... the first video in...
Hi Forum, so going by search this is a first thread re this subject, which is good but very sad in the same respect.
I am NOT looking for any...
Hi,
Sorry if this is not the right place for this, but I thought as there will be a lot of engineers on here who may well have done what I am...
Hey guys,
I had a slc 5/03 communicating nicely via 232 connection with my proface HMI until I started playing with the program I had been...
I APPRECIATE ALL HELP!👼
I am trying to set up a tool changer on a lathe.
Disclaimer :):
I have never used a PLC or the software to...
