g.mccormick
Lifetime Supporting Member
I am wanting to use an estop relay for the first time
http://www.automationdirect.com/adc...Relays_-z-_Gate_Safety_Relays/LG5925-48-61-24
The two channel would mean that the button (estop button)has two contacts and both are wired to the safety relay correct? I am planning on having probably 3 estop buttons, would I just wire the buttons in series (still two sets per button wired in parallel) or would I use 3 seperate safety relays? If I wanted my system to also be able to kill the estop bus, would you suggest having the system enable/disable power to the safety relay, or should I use a normal control relay and wire through its NO contacts to act as another estop button? I want the buttons or system to be able to initate an e-stop.
Thanks
http://www.automationdirect.com/adc...Relays_-z-_Gate_Safety_Relays/LG5925-48-61-24
The two channel would mean that the button (estop button)has two contacts and both are wired to the safety relay correct? I am planning on having probably 3 estop buttons, would I just wire the buttons in series (still two sets per button wired in parallel) or would I use 3 seperate safety relays? If I wanted my system to also be able to kill the estop bus, would you suggest having the system enable/disable power to the safety relay, or should I use a normal control relay and wire through its NO contacts to act as another estop button? I want the buttons or system to be able to initate an e-stop.
Thanks