Micrologix 1400 vs 1500

Note: I did need to upgrade to RS Logic 5000 version 20. and I had to update Control Flash. The L1 out of the box have no firmware on them so you have to load that first before you can load the program.
Click to expand...
The usb feature for flashing is neat too!
 
Note: I did need to upgrade to RS Logic 5000 version 20
Click to expand...
Any problems there? i bought a light ver. to play with mine and have been reluctant to upgrade my full version on my laptop I just have to many critical projects going on at the moment and haven't wanted to risk any ill effects!
 

Similar Topics

M
MSG from MicroLogix 1400 to MicroLogix 1500
Hi, I want to create MSG between MicroLogix 1400 and MicroLogix 1500 using DF1 protocol*. ML1400 will be the Master. I want to use DB9 port on...
Replies
3
Views
9,146
Ken Roach
Ken Roach
C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
62
Chris3EC
C
T
Micrologix 1400 input question
Hi, I am working with a Micrologix 1400 model 1766-L32BXB. With no input wires connected to the “in12” thru “in19”, I am getting 24 volts while...
Replies
4
Views
219
joseph_e2
J
A
MicroLogix 1400 Intermittent 0379h Fault
Hi everyone, I hope I don't butcher this up, please feel free to critique me wherever if I do, I have an issue I would equate to "chasing...
Replies
4
Views
285
OkiePC
OkiePC
U
How to communicate between Siemens S7-1200 and Allen-Bradley MicroLogix 1400?
Hi everyone, I'm working on a project where I need to exchange data between a Siemens S7-1200 PLC and an Allen-Bradley MicroLogix 1400 PLC. The...
Replies
8
Views
605
ulotrichous
U
Back
Top Bottom