rc10forlife
Member
Hello All!!
I am new to the forum and have seen alot of good answers so far, but I have not been able to resolve the issue I am having. 36hrs now and no go.....
For the short and sweet:
M340 PLC with BMX AMO 0410 as the output card.
I am trying to take the value from an HMI or OIT and then run it through FB logic to scale it out to the 0 to 10000 raw value. Looked like I had it, until I noticed I am comming up with an output that is 100 shy at full scale. In structured text the logic that I had been given from an integrator is working correctly.
I tried recreating in FB and I come up at 9900 on my output where the structured text block comes up 10000. I have to have FB as the programming language.
I will attach examples of both. PLEASE HELP!!!! I know I am missing something easy, just not catching it.....
I am new to the forum and have seen alot of good answers so far, but I have not been able to resolve the issue I am having. 36hrs now and no go.....
For the short and sweet:
M340 PLC with BMX AMO 0410 as the output card.
I am trying to take the value from an HMI or OIT and then run it through FB logic to scale it out to the 0 to 10000 raw value. Looked like I had it, until I noticed I am comming up with an output that is 100 shy at full scale. In structured text the logic that I had been given from an integrator is working correctly.
I tried recreating in FB and I come up at 9900 on my output where the structured text block comes up 10000. I have to have FB as the programming language.
I will attach examples of both. PLEASE HELP!!!! I know I am missing something easy, just not catching it.....