josesaucedo
Member
I have a panel view plus that boots up with 40 EXE error (missing OP or corrupted) Is there a source where I can re installed the OP? If so, can i use the same compact flash card?, or any 64 mb CFC? Thank you for the help.
Panelview plus 1500 OP missing or corrupted
- Thread starter josesaucedo
- Start date
Similar Topics
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Hi there,
Maybe I am overthinking this issue, but here is what I have going on. I have a program running for a water valve on a DI system. We...
Hi guys. Currently working on a project that requires a Panelview Plus 1500 to read a CSV File (recipe) from a network drive.
The issue I have...
Hi, guys, how’s going?
I added one “Trend Object” on screen A in PanelView Plus 1500. Then configured “Refresh Rate”, “Buffer” ……and set up...
Good morning,
I am onsite at a customer. They have a panel view plus 1500 that does not light up. The screen is always black.
I am not very...