RSLogix5000: Order of execution between periodic tasks

koaladua

Member
K
Join Date
Feb 2013
Location
Gloucester
Posts
3
Hi all,

If I have 2 periodic tasks (with the same priority number) configured to execute at the same period (say, 10ms), which one is going to be executed first?

Thank you.
 

Similar Topics

A
Achieving order of a pattern in rslogix5000
I have eight solenoid valves which works on six different pattern (pattern1 up to pattern6)based upon time . Each pattern has its own timing for...
2
Replies
24
Views
11,392
aec
A
N
RSLogix5000 Software Install
Hi! So my problem is a little funky, I had Studio 5000 v 24 and 30 installed, but forgot to install RSLogix (which I cannot go without). Is there...
Replies
2
Views
111
NewPLCuser2024
N
R
Odd request RSLogix5000 - Send 80 character string from One PLC to another with I/O
So I had an odd request from a customer for the above. I have written the logic and tested it all in one PLC with only using 7 outputs and 7...
2
Replies
15
Views
427
drbitboy
drbitboy
B
Adding emulator PLC to existing RSLogix5000 project
Hello everyone, I have an RSLogix5000 project which is running live in the factory but I need to make some changes to the logic. I want to test...
Replies
0
Views
1,120
BlindeBandiet
B
G
RsLogix5000 GSV Variable
Good Morning Everyone, I'm looking to use the GSV instruction to get I/O fault codes for my project so I know if there's a comms issue in my E/IP...
Replies
5
Views
863
JeremyM
JeremyM
Back
Top Bottom