I'm using TwidoSuite v2.2 to program a LCAE40DRF Twido controller. Approx 3/4 the way through the programming I started getting an error message that "The application requires more memory then the controller can provide". I talk to the local Schneider rep and he tells me you need to buy the 64kb memory expansion module. So I do, and I add it into the controller in the TwidoSuite Describe section and keep programming. Even though I added the memory expansion module in the Describe section, I still kept getting the memory error, but I kept programming.
I finished the program and once the expansion memory module arrived, I installed it into the processor, and tried to download the program and to my surprise it would not work because of the not enough memory error.
So now I'm stuck and I'm not sure what to do. When I check the Memory Usage under configure->configure the data, it shows Mem 1 at 107% and Mem 2 at 69 % unused. If this is the case, why am I still getting that there's not enough memory?
I finished the program and once the expansion memory module arrived, I installed it into the processor, and tried to download the program and to my surprise it would not work because of the not enough memory error.
So now I'm stuck and I'm not sure what to do. When I check the Memory Usage under configure->configure the data, it shows Mem 1 at 107% and Mem 2 at 69 % unused. If this is the case, why am I still getting that there's not enough memory?