FactoryTalk View Studio Issue

Oh wait, KB46758 suggest that it is "locking up" because the tag browser is opening off screen. I ran into a similar problem years ago when switching between dual/single monitors. Of course, I'm sure there are other ways to cause it.

You can tell if this is the problem by clicking the ellipse (...), then press escape on the keyboard. If it appears to no longer be "locked up" then it was opening, just off the screen somewhere.

The KB gives a few solutions to get the window back if that is in fact the problem.

This was the cause. Forgot I had used dual monitors at work with the laptop (what an idiot!). Anyway, all working now. Many thanks for your assistance and everybody else.
 

Similar Topics

Hello, I made a change in alarm setup in factory view studio, where I changed a alarm message text. After that I made a run application and...
Replies
0
Views
70
Hi all, I'm having an issue with connecting View Studio emulation to a real PLC. I am running View Studio 8.01 on a Hyper-V virtual machine...
Replies
0
Views
233
Hello. I have a Project I'm doing in Factorytalk View Studio. One of my displays I created has a bunch of red x's on all of the objects I created...
Replies
5
Views
510
So, I'm new to the PLC world (fresh graduate) and at my job I've been pretty much only helping out the other programmers with simpler tasks while...
Replies
1
Views
583
Good morning, I have a project coming up that will require my HMI runtime to toggle from English to Spanish via selector switch. What is the...
Replies
0
Views
433
Back
Top Bottom