I have 2 identical machines each running a SLC 5/05 and a Panelview Plus (I think) 600. Both of these machines are using identical IP addresses (169.254.215.1) and Processor names (2772). The panelviews are communicating with the processors via Ethernet (no network). The IP address of the PV+ is 169.254.215.2. I want to separate the machines and give them different IP addresses in order to get them on our plant floor subnet of 192.168.1.???.
I think the PV+ is communicating with the SLC using its device shortcut of 2772, but I don’t know how this is mapped. I need guidance to change the IP addresses and processor names of each device.
Thanks in advance for any help.
I think the PV+ is communicating with the SLC using its device shortcut of 2772, but I don’t know how this is mapped. I need guidance to change the IP addresses and processor names of each device.
Thanks in advance for any help.