Hello dmroeder,
First I have a native SP3 (or I think so because there's no SP3 under add/remove programs, is that really the way to tell it?).
Before I apply the patch, when I try adding 1747 PIC/AIC+ driver, there would be a pop-up message saying something like "the application didn't pass Windows logo" and the driver would always be on "Stopped" status.
Now after I applied the patch there's still the same pop-up message but no the driver is on "Running" status. Does this mean the patch actually has worked on me? Of course I'll try it on site when I got an appointment.
------
Side question, when I launch RSLinx (lite v2.41.00) there's this 1 driver "Linx Gateways, Ethernet" that I can't seem to delete, is that normal? Is that ok to run together with the PIC driver that I supposed to be using to upload PV600 RS-232 (DH485) using straight cable direct to laptop?
Also on PanelBuilder32 Upload File window, I should be selecting "RSLinx Network" as Transfer Type right? Would there supposed to be a node to appear under the PIC driver (under "Select Source/Autobrowse" that appeared after selecting RSLinx Network transfer type) when I'm already connected to the PV600?
Sorry for the basic and out of topic questions, I'll totally new to Allen Bradley. You can reply me via PM to keep the thread on right direction.
Thanks very much for your very helpful work, keep it up sir!