kallileo
Lifetime Supporting Member
We are using some CIP sequences on some of our machines. Normally the washing program consists of 5 washing cycles that have some small differences between them. Each cycle being a function block that is called in five step SFC program.
I was wondering if and how it's possible to make a fully customizable washing sequence so the user can make his own program and where the function blocks can be called in any order.
For example the user could select any of five washing cycles from five combo boxes on a HMI screen to construct a washing program in any possible combination.
It's more of a concept than a real problem. I'm just interest how to approach it.
I was wondering if and how it's possible to make a fully customizable washing sequence so the user can make his own program and where the function blocks can be called in any order.
For example the user could select any of five washing cycles from five combo boxes on a HMI screen to construct a washing program in any possible combination.
It's more of a concept than a real problem. I'm just interest how to approach it.