Delta plc DSPA instruction

ilkay39

Member
I
Join Date
May 2018
Location
İstanbul
Posts
1
Hello everbody,

I used SX2 plc for tracking the position of the sun. But the outputs of the command (azimuth angle and zenith angle) are not compatible with real positon. Is there anybody used this instruction before?
Thanks in advance.

ilkay
 

Similar Topics

Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
92
yawin
Y
A
DELTA PLC-COMMGR software
I have downloaded COMMGR 1.15 software on my laptop. After downloading it works. When I stop and start the program again it doesn't work. It is...
Replies
2
Views
151
Alisahib
A
J
beckoff io and delta plc
How i Can connect Delta plc, with Beckoff remote IO cards?
Replies
2
Views
173
jjorge
J
A
Allen Bradley ControlLogix PLC communication with Delta V DCS
Hi Everyone, I am currently trying to communicate ControlLogix PLCs via EtherNet/IP with Delta V DCS. There is a VIM2 card configured for...
Replies
1
Views
272
Ken Roach
Ken Roach
D
DELTA PLC
Does anyone know videos in English with trains for Delta PLC
Replies
1
Views
177
WhinnieThePooh
W
Back
Top Bottom