factory talk vantage point(ver 3.12 & 4.0) installation failed

Join Date
Nov 2010
Location
india
Posts
13
I try to install factory talk vantage point ver 3.12 and ver 4.0 in my laptop having operating system windows 7 (enterprise edition) 64 bit.
both of them failed to install and giving error messages...
Jainil,
Today I tried to download vantage point 3.12 from CD and also from Rockwell toolkit hard drive. But it was showing following errors.

But factory talk vantage point ver 3.12 is successfully innstalled and runiiing smoothly on windows XP SP-3 (32 bit).

Please help me to install on windows 7 enterprise x64
Attached are some screen shots regarding errors i face during diffferent installation.
 
I am fairly certain Vantage point and historian require Windows server R2
Not windows 7
 
Thanks for your reply.
true,but vantage point version 3.12 is working absolutely fine in windows XP SP-3 x32 operating system and i checked so...
how is this possible?
 

Similar Topics

I am trying to enable an external alarm via computer speakers for Factory Talk Network Distributed Edition. I am using Alarm and Events setup. I...
Replies
7
Views
126
We have a quad monitor setup with FT SE and we are utilizing a header screen at the top of every display. when we open a new page we abort the...
Replies
0
Views
77
Good day colleagues, I have a problem with a plc slc 5 since I export the tags to my factory program to load them into a panel view 1000 plus 6...
Replies
0
Views
88
Hi all, Attached below is an example of what is happening to our existing SCADA. It seems after patching some Rockwell Software that I thought...
Replies
9
Views
263
The client has an application that when communication between the PLC and the Factory Talk VIEW supervisory fails, the object in the supervisory...
Replies
5
Views
226
Back
Top Bottom