WPL Soft Project Problem
- Thread starter tadesss
- Start date
Similar Topics
Hi forum members.
I am programming a delta DVP32ES plc with TP04 HMI. When I convert number of input pulses per 10 seconds to m/min by dividing it...
Hi,
We have an application that has a device that goes through a reboot (appears un-graceful)
What then happens is the MVI module appears to hang...
I am working on setting up a Prosoft Datalogger model PLX51-DLplus-232. This unit will be collecting data from a SLC 5/05 on the DB9 port set to...
Hello. I am trying to use a Prosoft AN-X4 to improve the communications for a new panelview plus 7. This is going from a SLC-500 through DH+ to a...
Hi.
I'm using a Modbus ProSoft where I basically map data to a big INT array.
Example, where GX_I_63HPU is a REAL, MNETC.DATA.WriteData[200] an...