How can able to get Tx and Rx Packet/Byte Values in PLC

Velpandian P

Member
V
Join Date
Aug 2019
Location
Tamilnadu
Posts
4
Hi everyone!

I just want to get the transmit and receive data bytes nor packets value from rs-232 com port in compactlogix L32E controller. Else, please give some solution about to get those data bytes/packets value in wonderware intouch.

Please assist me, if anyone have any idea about it.
 

Similar Topics

D
SLC 500 - unable to verify settings due to packet timeout
When I try to connect my SLC 500 to my deskptop it tells me "unable to verify settings due to packet timeout" I already bought a null modem cable...
Replies
13
Views
16,229
bernie_carlton
bernie_carlton
M
unable to verify settings due to packet timeout! Check all cables and configuration a
I am trying to configure RS Linx to talk to a Micrologix 1200. The micrologix was connected to a panelview so I took out its RS-232 cable and...
Replies
1
Views
6,434
Ken Roach
Ken Roach
N
2707-NC5 Allen Bradley Cable Pinout
Hello, Does anyone have one of these cables and willing to open the case so I can see the cable connections inside? 2707-NC5 I have sourced the...
Replies
3
Views
87
Mickey
Mickey
S
A-B cable 1747-C13 for use with adaptor 1747-UIC... Just a regular ethernet patch cable?
Hi all I am working with a SLC 5/02 and having trouble getting online with it. I am using a 1747-UIC adaptor which allows for USB>serial and...
Replies
9
Views
141
Skidood
S
K
Need Help Modifying Citect Scada Historical Trend Variable Data
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...
Replies
0
Views
123
kreamsippycup
K
Back
Top Bottom