bob1371
Lifetime Supporting Member
Good morning or afternoon wherever you may be.
New to Mitsubishi controls and playing around with software and the simulator.
GX Works 2
Wanted to mess around with the pulse output (PLSY) instruction but doesn't appear to work as I expected.
The following is a screenshot of the logic as its running in the simulator. my rung is true as I have Y001 ON. I added the counter to see if Y000 is in fact pulsing but not seeing anything.
Any suggestions or ideas? I did search the forum and found a few threads but still no luck with this.
Thanks
http://imgur.com/a/D9irLgi
New to Mitsubishi controls and playing around with software and the simulator.
GX Works 2
Wanted to mess around with the pulse output (PLSY) instruction but doesn't appear to work as I expected.
The following is a screenshot of the logic as its running in the simulator. my rung is true as I have Y001 ON. I added the counter to see if Y000 is in fact pulsing but not seeing anything.
Any suggestions or ideas? I did search the forum and found a few threads but still no luck with this.
Thanks
http://imgur.com/a/D9irLgi