xC0MMAND0x
Member
I have 1x SLC500 and 4x VFDs on Ethernet. I have a new PLC program to download with new IP address information built in.
1. Can I just change the PF525 IPs from RSLinx Classic? It looks like it is editable there, and that seems to be the easiest thing. Any issues with that?
2. What is the proper order of operations? Should I download the new PLC program first, and then change the VFD IP addresses? Or, should I change the VFD IP Addresses and then download the new program?
Production is completely down so I have 10 hours to make these changes (as well as others).
Please advise / throw in any input.
1. Can I just change the PF525 IPs from RSLinx Classic? It looks like it is editable there, and that seems to be the easiest thing. Any issues with that?
2. What is the proper order of operations? Should I download the new PLC program first, and then change the VFD IP addresses? Or, should I change the VFD IP Addresses and then download the new program?
Production is completely down so I have 10 hours to make these changes (as well as others).
Please advise / throw in any input.