Good day!
Do any of you guys have any suggestions or ideas on how to make an object in RSView32 on top of other objects once the tag linked to it is active?is this even possible?
the application involved is for materials pumping in a pipe. The pipe animation is to fill with a specific color depending on the material to be pumped; the fill depends on volume of the pumped material. there are at least 5 materials to be pumped and since the pipe is very long, 2 or more materials might be contained along the pipe at the same time. this would mean that there should be 2 or more colors/materials moving(or filling)along the pipeline. the materials to be pumped have no sequence, it solely depends on what their customer's request.
what i did was to make several copies of the same pipe but with different colors to distinguish type of material being pumped. the problem is that this only works if there is a definite sequence in the materials being pumped since the objects have a defined order(which object is on top or seen first then second and so on...).this is why i need to find a way to make the object on top once its tag is set.
REAAAAAALLLLLY would appreciate any help on this.
Do any of you guys have any suggestions or ideas on how to make an object in RSView32 on top of other objects once the tag linked to it is active?is this even possible?
the application involved is for materials pumping in a pipe. The pipe animation is to fill with a specific color depending on the material to be pumped; the fill depends on volume of the pumped material. there are at least 5 materials to be pumped and since the pipe is very long, 2 or more materials might be contained along the pipe at the same time. this would mean that there should be 2 or more colors/materials moving(or filling)along the pipeline. the materials to be pumped have no sequence, it solely depends on what their customer's request.
what i did was to make several copies of the same pipe but with different colors to distinguish type of material being pumped. the problem is that this only works if there is a definite sequence in the materials being pumped since the objects have a defined order(which object is on top or seen first then second and so on...).this is why i need to find a way to make the object on top once its tag is set.
REAAAAAALLLLLY would appreciate any help on this.