Hi, I am having a right nightmare of a time. I have never programmed a Zebra printer before and need some help from you professionals. I don't want to make any mistakes. The Zebra is using RS232 into a Siemens S7-1200.
I have no idea if the Zebra needs a label layout then apply a script.
I have attached in the zip file with a picture (PICTURE 1) which the project currently produces and (PICTURE 2) which is what is wanted (adding of a Data Matrix). I have also added the project Tia V12 and apparently a script from a similar label.
Any help would be very much appreciated.
I have no idea if the Zebra needs a label layout then apply a script.
I have attached in the zip file with a picture (PICTURE 1) which the project currently produces and (PICTURE 2) which is what is wanted (adding of a Data Matrix). I have also added the project Tia V12 and apparently a script from a similar label.
Any help would be very much appreciated.