Hello,
I am familar with AB pID loops but this Concept stuff is a little different.
First has anyone have any example PID blocks connected to look at..Concept Quantum program setup for LAD.
Concept offers 5 different PID blocks to choose. I just want to use a standard PID block to control Temperature, Pressure, and Motor AMPs.
I have your standard analog in/out. (PV/CV)
I want to go bumpless tranfer from Man/Auto. Change setpoint remotely..and if possible utilze the Concept FFB block for Autotune.
I just don't see through the "Modicon Haze" of their Help file...Example are quit poor...
Any help is appreciated..thanks in advance..
I am familar with AB pID loops but this Concept stuff is a little different.
First has anyone have any example PID blocks connected to look at..Concept Quantum program setup for LAD.
Concept offers 5 different PID blocks to choose. I just want to use a standard PID block to control Temperature, Pressure, and Motor AMPs.
I have your standard analog in/out. (PV/CV)
I want to go bumpless tranfer from Man/Auto. Change setpoint remotely..and if possible utilze the Concept FFB block for Autotune.
I just don't see through the "Modicon Haze" of their Help file...Example are quit poor...
Any help is appreciated..thanks in advance..