pauly
Member
I have a 1794-AENT module that needs to have the i.p address of 150.1.40.55 I managed to set the address with the BootP utility and set my test Controllogix ENBT card to 150.1.40.60.I am able to ping the AENT module but when I download the configutation to the L61 controller there is a #16 0204 error and a yellow triangle on the AENT when I browse online. I changed the ENBT address to 192.168.1.10 and the AENT to 192.168.1.11 (11 on the rotary switch)and I can now see the AENT in the configuration without any errors and communicating. Does anybody have any ideas why there should be this issue with setting the i.p address?