About the 1769-HSC fault

Hello everyone
I have a project used the 1769-HSC module, the module install the 7 slot. I confige the module, as the module power on, the module OK is flishing red, I check the program,find the local:7:I.fault all the bits are set 1, but I don't cleaning the fault and i don't find the error code, the datum isn't the fault introduce, so please help me find where the fault or where find the error code in the program,thank you.the attachment are alarm pictures.

http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1769-um006_-en-p.pdf

"Flashing red - Recoverable fault. Reconfigure, reset, or perform error recovery.
See Non-critical versus Critical Module Errors on page 113.
TheOK indicator flashes red for all of the error codes in the Configuration Error Codes table on page 117."

This may help you out.
Regards,

hello gclshortt:
Thank you , I have the datum of the 1769-HSC module and i know the datum of page 117 are error codes and error extended information code, but i don't see the error code in the program, so i don't know where the fault configue of the module, please direction me find the error code in the program, thanks look forward your reply.

The module has a distance rating of four, therefore the module must be within four modules of the I/O bank’s power supply.