forqnc
Lifetime Supporting Member
Hi All,
I am having issues communicating between an Omron CJ2M PLC and a Lenze SMV Drive (with Ethernet Module).
I have set up Network Configurator with 2 tags (D350 and D450) of 8 bytes in length, and selected Input Assembly 106, Input custom.
All I am trying to do is view 4 pieces of information from the drive, Amps, kW, kWH and Frequency.
I have set parameters P450 to P453 to display the above.
The red MS light on the CPU flashes and when I check, under network configurator, to monitor the CPU I have a 01:0315 error.
I found a PDF which stated 01:0315 is an Invalid segment in the connection path.
Any assistance is appreciated, this is a one off, where the customer requested these drives.
I am having issues communicating between an Omron CJ2M PLC and a Lenze SMV Drive (with Ethernet Module).
I have set up Network Configurator with 2 tags (D350 and D450) of 8 bytes in length, and selected Input Assembly 106, Input custom.
All I am trying to do is view 4 pieces of information from the drive, Amps, kW, kWH and Frequency.
I have set parameters P450 to P453 to display the above.
The red MS light on the CPU flashes and when I check, under network configurator, to monitor the CPU I have a 01:0315 error.
I found a PDF which stated 01:0315 is an Invalid segment in the connection path.
Any assistance is appreciated, this is a one off, where the customer requested these drives.