You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

Reply
 
Thread Tools Display Modes
Old August 20th, 2013, 05:25 AM   #1
annicat1
Member
Australia

annicat1 is offline
 
Join Date: Mar 2013
Location: Adelaide
Posts: 6
Timers and counters

Good evening. I need your advise in regards to some tasks that I have with ladder logic & mnemonic code. The tasks are:
1)ladder logic to energize the output 1 one minute and 5 sec after input 1 is closed. answer: LOD 1, TIM 1 (set for 1 min 5 sec=650),LOD TIM 1, OUT 1
2) design a ladder diagram for start/delta motor starter using a 3.5 second delay from start to delta. star and delta contactors must not be energized at the same time. izumi controller addresses: start button 1, stop button 2, overload 3, main contactor 200, star contactor 201, delta contactor 202. answer: need to use timer as well and NC contacts in order to prevent star and delta contactors energized at the same time.But need help with the logic.
3)A large 3 phase motor has a restricted duty cycle and must not be started more that 5 times in 1 minute. Develop the logic to accomplish this starting motor DOL. should the motor be started 5 times within 1 minute, then it must not be able to started again until a further 2 minutes have elapsed. answer: need set counter to 5 and have delay timer for 2 minutes. But need help with the logic.
  Reply With Quote
Old August 20th, 2013, 05:58 AM   #2
iant
Lifetime Supporting Member + Moderator
Australia

iant is offline
 
iant's Avatar
 
Join Date: May 2002
Location: Melbourne
Posts: 3,691
welcome to the site
design on paper will help you
you already will know the Star/Delta hard wire control
as the Star contactor has to both energize first you can count the number of times it starts and delay the time until the next start can occcur
start programming and Post either a snapshot or zipped copy of the program as far as you have gone - with IZUMI it might be better to use the SNAPSHOT function
__________________

Give all the answers
- People seldom learn.

Guide People to the posibilities
- Their Answers will come easily.
- Their Knowledge will grow.

They will then teach others

Regards
Ian Trost
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
how many timers and counters can we have ? leonlai LIVE PLC Questions And Answers 5 December 21st, 2012 01:39 PM
devise a clock using timers and counters tomm22948 LIVE PLC Questions And Answers 16 March 9th, 2012 05:50 PM
Timers, Counters, Comparing, a simple program_need advice neokeelo LIVE PLC Questions And Answers 12 February 24th, 2009 10:33 PM
TOYOPUC Timers & Counters richxie LIVE PLC Questions And Answers 3 January 27th, 2007 10:56 PM
reseting counters and timers in rs 5000 darrenj LIVE PLC Questions And Answers 4 February 23rd, 2005 07:29 PM


All times are GMT -4. The time now is 02:01 AM.


.