Networking nz2ehf-t8 mitsubishi switching hub with a PC

IdealDan

Member
I
Join Date
May 2017
Location
MA
Posts
480
Hi Guys,
What is the procedure for networking a PC to a Mitsubishi switching Hub (nz2ehf-t8)for a remote PLC Program Download to a MITSUBISHI PLC?
 

Similar Topics

Russ
Networking issues, and am curious about Produce/Consume versus MSG: (Allen Bradley PLCs)
I have a client who periodically experiences network communication issues. Sometimes when I VPN into the site, their SCADA systems will flash comm...
Replies
2
Views
169
Ken Roach
Ken Roach
M
IP networking and static IP address
guys: I have a problem with my IP configuration. my organization networking has 2 subnets. 10.0.0.25 and 10.1.0.25 both under 255.255.255.0 all...
Replies
2
Views
565
harryting
H
M
PLC Networking IP setting and subnetting
I have a question about IP addressing and Networking. I have a PLC with following IP address 10.1.0.120 this is an static PLC PLC is working like...
2
Replies
15
Views
2,003
widelto
widelto
H
feedback on Industrial Networking Solutions?
I swear I post this yesterday but can't find it. Don't see any notification about the post removal either. Maybe my memory is malfunctioning...
Replies
3
Views
2,568
jgreenewv
J
ceilingwalker
Networking multiple PLC's and an RC advice
Hello all. I have a system with 4 different machines, each has their own PLC. I also have a RC in this subnet also. I created a server PLC that...
Replies
0
Views
462
ceilingwalker
ceilingwalker
Back
Top Bottom