Hi all
I am looking at a project ,and as part of it I have to remove
a slc 5/05 processor.The slc rack has two,eight channel analogue
input cards and the rest is digital in and output cards.
We are adding in a control logix so my question is,what is the best
way to tie into the slc rack.Is it by adding a DH+/RIO card in thr control logix and a SN card in the SLC rack.I have seen posts here
about PLC 5 and using the rack as a rack in the control logix program.Is this correct and is there a way to set it up as a devicenet rack as we have a devicenet scanner in the control logix.
Thanks for taking the time to read this.
Donnchadh K.
I am looking at a project ,and as part of it I have to remove
a slc 5/05 processor.The slc rack has two,eight channel analogue
input cards and the rest is digital in and output cards.
We are adding in a control logix so my question is,what is the best
way to tie into the slc rack.Is it by adding a DH+/RIO card in thr control logix and a SN card in the SLC rack.I have seen posts here
about PLC 5 and using the rack as a rack in the control logix program.Is this correct and is there a way to set it up as a devicenet rack as we have a devicenet scanner in the control logix.
Thanks for taking the time to read this.
Donnchadh K.