I have a problem in my logic circuit that I think should be easy but can't figure it out since i now have 3 days of programming experiance.
I'm setting up a system thats getting an input from another sort of sensor, and my problem is that my PLC is seeing what should be one pulse as a couple of pulses, I want to fix this by saying that once the PLC recieves an input to not pay attention to any more inputs until 100 ms passes. The only way I can think of enacting this at the current moment delays my entire process, which I don't want to do.
I'm setting up a system thats getting an input from another sort of sensor, and my problem is that my PLC is seeing what should be one pulse as a couple of pulses, I want to fix this by saying that once the PLC recieves an input to not pay attention to any more inputs until 100 ms passes. The only way I can think of enacting this at the current moment delays my entire process, which I don't want to do.