Kinetic 6000 fault E05

BITI BISHARA

Member
B
Join Date
Jul 2019
Location
BRAHMAN
Posts
41
Hello guys,
Please could you tell me what is the reason for E05 fault.
Also, I observed reset after fault is disappear.
Kind could you guide me to solve the issue.
Kind regards and thanks.
 

Similar Topics

J
kinetic 6000
can some please tell me if there is a parameter to settle down the MoveStatus bit. its toggling on and off even if the motor is not moving. need...
Replies
1
Views
1,488
Ken Roach
Ken Roach
T
Kinetic 350 F43 Error
Hello, Currently my Kinetic 350 having an error of F43. I checked in the manual as it said: An attempt was made to enable the axis through...
Replies
8
Views
838
mike3475
M
S
Kinetic 6500 Drive fault code S46
Hello guys, Frequently servo drive stops with fault code S46.Please can you tell me what could be the reason. Thanks and kind regards...
Replies
3
Views
886
AlfredoQuintero
A
S
Kinetic 5500 - Absolute Move - MAM PC Bit Understanding
Hello all, So I have a linear actuator connected to my servo and I command an absolute move to a position, for example 80mm. Now at 75mm...
Replies
0
Views
1,075
Sensorless
S
1
Is it possible to make 1734 VHSC24 slave to kinetic 5700 drives
Hey people! For a school project, I and a friend have a 1734-VHSC24 connected to an encoder. Simultaneously we have 2 x kinetix 5700 with servo...
Replies
2
Views
1,919
10suwe
1
Back
Top Bottom