Win10 & PVC C400

bbishop108

Member
B
Join Date
Mar 2017
Location
Indiana
Posts
86
So I just recently got a new win10 laptop for work, and I just found out that win10 is NOT supported for connecting to the PVC C400, C600 using the mini usb connection and cable. Unfortunately I have not been successful connecting to any PVC C400/C600 HMI's with the win10 pc. Even using ethernet and trying to use the static ip address, and even the default ip address 169.254.254.2 does not work.


Has anyone been able to connect to these older HMI's using windows 10? If so, please share that magic trick. Thanks
 

Similar Topics

P
Is OPC DA Win7 client, Win10 server possible?
I have a Win10 64 bit host for my OPC DA server, which is Indusoft (Studio,Scada.OPC.3). Locally OPC works, Matrikon OPC Explorer. On my Win7...
Replies
5
Views
1,154
patjdixon
P
J
PvP 7 Win10 Screen Navigation
Greetings! I have had the extreme pleasure of being introduced to Rockwell's Win10-based PanelView Plus 7 and after having an extraordinarily...
2
Replies
15
Views
2,375
dmroeder
dmroeder
O
Ghost USB Boot for Win10
Guys I know this may not be a PLC question but I do have a issue that I was needing some advise. I was needing to know the best way to create a...
Replies
6
Views
1,938
NetNathan
N
D
Will NI Lookout run on Win10?
I have a client who is looking to upgrade from Win7 to Win10, they're currently running NI Lookout 6.7.1 on the Win7 machine, it's a 64 bit OS...
Replies
0
Views
1,277
defcon.klaxon
D
S
1747-uic gets automatically disconnected on win10
I connect SLC 500- 5/02 cpu with 1747 UIC card to my Win10 pc using rslogix500/rslinx classic. There are four CPUs in a series.. if I leave the...
Replies
3
Views
1,262
geniusintraining
geniusintraining
Back
Top Bottom