Having a weird issue.
card setup as single ended no alarm, float data. all channels 0-20ma and 0-100%
all of the rtn and rtni jumped together on the right hand side of the RTB with a single rtn on the left hand side of the RTB brought to -24volts
channel 12 is staying maxed out when the rtb is plugged in.
scratching my head on this one. seems like the card is wired right unless I am missing something.
card setup as single ended no alarm, float data. all channels 0-20ma and 0-100%
all of the rtn and rtni jumped together on the right hand side of the RTB with a single rtn on the left hand side of the RTB brought to -24volts
channel 12 is staying maxed out when the rtb is plugged in.
scratching my head on this one. seems like the card is wired right unless I am missing something.
Last edited: