Omron Drm21 Take out node
- Thread starter JuanPLC74
- Start date
I am assuming you have a CJ1 Omron PLC and you are removing the CJ1W-DRM21. Here is a tech note on the IO table:
https://www.myomron.com/modules/KB/file_d.php?id=103
Regards,
https://www.myomron.com/modules/KB/file_d.php?id=103
Regards,
Similar Topics
Dear : every one
I have problem of the DRM21 error E2...!! that i connect V680
RFID 3 module.After connect resistance 130 Ohm at the module No.3...
CJ2M-CPU33 with CJ1W-DRM21 device net to stanley nutrunners
I am having trouble when starting up the machine (Initial Power to everything) the...
Hey All,
Looking for some direction on how to map a SMC EX250-SDN1 SI unit to an Omron CJ1W-DRM21 device net scanner. The manual says that it...
IN MY COMPANY WE ARE USING OMRON CS1W-DRM21V1 MODULE AS A MASTER UNIT.
THROUGH DEVICENET WE CONNECTED DRT2-ID16 & DRT2-OD16 INPUT & OUTPUT...
:banghead:
Anybody know of a link to the CS1W-DRM21 manual? Ive been looking on the omron site for the last half hour, and im about to throw...