Resetting Digital Input module automatically from RS Logix 5000

hasan_ali

Member
Join Date
Dec 2007
Location
Midlands
Posts
55
Dear,
I am having Point I/O connected to the control Logix on ethernet network. When i restore power of point I/O any one or more than one of the digital input cards of point I/O remain on fault. Then i reset them either by plugging out and plugging back in or reset button in its configuration in RS Logix 5000. I like that when there is communication re-establishment it should automatically reset all the digital input modules.I would like to know how can i reset digital input card from RS Logix 5000 automatically (will SSV command work or any other status command would be used to do this)?
 
What's the model # of the point I/O you are using...

The reason I ask is that each 1734 module has varying methods that you can configure for fault behavior and auto recovery.
 
Last edited:
Maybe try the message instruction. If you use CIP Generic as the Message Type then you can choose Device Reset in the Service Type.

I have used the SSV to inhibit the module and then remove the inhibit. Not sure if that would do the trick for you though.

OG
 

Similar Topics

Hi, I recently installed 2 1783-NATR devices into two of our machines. The machines are pretty much identical, both having 1769- L24ER-QFC1B...
Replies
4
Views
280
How is it going y'all? So We have had a pesky problem with an EH 300 flow meter. We are using EIP to reset the totalizer, and for some reason the...
Replies
3
Views
710
MELSEQ "intelligent modules" configuration, programmatically resetting the CPU Hello. This is for the Mitsubishi experts, and thanks in advance...
Replies
5
Views
1,016
Hi all, is there an easy way to reset a user defined shift register to 0? i have a data type containing 8 bools for an array of 10 and would like...
Replies
12
Views
3,146
Hello, I am curious if there is a way to reset a safety password on the CPU mentioned in the title. The previous tech that retired(I took his...
Replies
11
Views
3,993
Back
Top Bottom