edwardeduful
Member
Hello All,
Please our powerflex 755 20G1AJD545AN0NNNNN runs for about 2 weeks then trips on F5037.
I have checked the CAT6 cable that its not close to power cables.
This drive is connected to a stratix switch 8000 with 4 other powerflex drives and 2 E300 relays.
I understand these are multicast devices, so i must enable IGMP snooping in stratix switch. What i want to understand is must i enable the IGMP in the switch the 20G1AJD545AN0NNNNN drive is connected to alone or i must enable the IGMP on all the stratix switches on the network.
There are Ten stratix switches on the network.
Please your contribution will be appreciated.
Please our powerflex 755 20G1AJD545AN0NNNNN runs for about 2 weeks then trips on F5037.
I have checked the CAT6 cable that its not close to power cables.
This drive is connected to a stratix switch 8000 with 4 other powerflex drives and 2 E300 relays.
I understand these are multicast devices, so i must enable IGMP snooping in stratix switch. What i want to understand is must i enable the IGMP in the switch the 20G1AJD545AN0NNNNN drive is connected to alone or i must enable the IGMP on all the stratix switches on the network.
There are Ten stratix switches on the network.
Please your contribution will be appreciated.