craigsimon
Member
We have a plant in Reynosa, Mexico that has a machine with a Siemens S5 controller in it. I am not sure of the actual model. The processor is now in error mode. I haven't gathered much information yet, but they will be looking for a local (if possible) Siemens integrator that can debug and fix the processor. We don't have many Siemens, thus we don't have the expertise or software here to debug it ourselves. I will be gathering more info over time, but was wondering if anyone on this forum is in the McAllen, TX area and has Siemens expertise and software. Again, all I know at this time is the PLC is in error mode. They have 3 identical machines and switched two controllers and the error mode moved with the PLC. They say the battery is good, but not sure if the battery was removed with power off.
Thanks
Thanks